10.0 Tools & Equipment for Construction

Hebel PowerBlocks can be laid using construction tools/equipment.

String Line – A string line is required to accurately set out and lay Hebel PowerBlock Walls.

Brick/Blocklaying Profiles – used to gauge the block course are being laid level.

Mixing Bucket – a minimum 20 litre bucket is required for mixing Hebel Mortar, Hebel Adhesive and Hebel HighBuild render.

Electric Drill – an electric drill is required to mix the Hebel Mortar, Hebel Adhesive and Hebel HighBuild render. It is also used to drill clearance holes in the blocks so they can be placed over the tied down rods where required.

Stirrer – fitted to the electric drill, the stirrer is used to mix the Hebel Mortar, Hebel Adhesive and Hebel HighBuild render inside the mixing bucket.

Notched Trowel – the notched trowel is used to apply the Hebel Adhesive to the Hebel surfaces. The width of the trowel must match the block thickness to ensure the adhesive is applied with full and even coverage.

Rubber Mallet – a rubber mallet is required to ‘tap’ the Hebel PowerBlocks onto the adhesive and into place.

Spirit Level – required to install the blocks level and plumb.

Hand Saw – a Hebel handsaw can be used to cut Hebel PowerBlocks to length and height.

Powered Bandsaw – a bandsaw is ideal for cutting Hebel PowerBlocks. (perfect when there are many site cuts to be performed).

Hebel Square – a purpose built square is available for use when marking and cutting Hebel PowerBlocks.

Steel, Plastic and Timber Trowels – these trowels may be required for the installation of the Highbuild render and texture coatings.

Sanding Float – used to even out inconsistencies in the Hebel PowerBlock Wall in preparation for render/texture coats.

Hebel Hand Router – may be used to chase services into solid Hebel walls.

Circular Saw – (fitted with a diamond blade) may be used to chase services into solid Hebel walls.

Electric Router – may be used to chase services into solid Hebel walls.

Crane – may be required to lift large Hebel Lintels and Hebel custom floor panels.

Lifting Grabs – required for use in conjunction with crane for lifting Hebel lintels and custom floor panels.

Scaffold – Scaffold is required when building block walls. The amount of scaffold depends on the height of the walls.

Sealant Gun – required to fill the control joints in the Hebel PowerBlock Walls.

Image 10.1:  Hebel® tools

find out more